American Journal of Environmental Protection

| Peer-Reviewed |

Treatment of Hazardous Solid Waste Using Solidification and Stabilization Technique

Received: May 27, 2017    Accepted: Jun. 30, 2017    Published: Jul. 31, 2017
Views:       Downloads:

Share This Article

Abstract

The immobilization of toxic metals present in the pharmaceutical effluent treatment plant (ETP) sludge is studied using the solidification/stabilization (S/S) technique. Different mixtures of cement, lime and bentonite as binders and additives (Pulverized fuel ash (PFA), silica fume and quarry dust) are used in order to reduce the mobility of the metal constituent of the pharma sludge as well as to strengthen brick. The interaction between the S/S matrix were studied using X-ray diffraction spectroscopy (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Thermo gravimetric-Differential Thermal Analysis (TG- DTA), Unconfined Compression Strength, Toxicity characteristics leaching procedure (TCLP) tests. The results showed that the optimized composition matrix have a strong fixing capacity for heavy metal includes Cu, Zn, Fe, Co, Pb, Ni and Cd. All the specimens have been observed to be sufficient in achieving the target compressive strength of 0.3 N/mm2 required for landfill disposal and mixed binders (Cement, Lime, and Bentonite) brick can be recommended for external use in construction i.e. for pave of pedestrian roads.

DOI 10.11648/j.ajep.20170604.13
Published in American Journal of Environmental Protection (Volume 6, Issue 4, August 2017)
Page(s) 94-100
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Solidification and Stabilization, Pharmaceutical Sludge, Binder, Hazardous Waste, Brick, Compressive Strength

References
[1] Selnur Ucaroglu, Ilhan Talinli, Recovery and safer disposal of phosphate coating sludge by solidification/stabilization, Journal of Environmental Management. 105: (2012) 131-137.
[2] Andres A, Ibanez R., Ortiz I, Irabien J. A, Experimental study of the waste binder anhydrite in the solidification/ stabilization process of heavy metals. Journal of hazardous materials 57: (1998) 155-168.
[3] Zhenhong Liu, Quanyuan Chen, Utilization of the sludge derived from dyestuff-making wastewater coagulation for unfired bricks. Construction and Building Materials 25: (2011) 1699–1706.
[4] Safiuddin Md, Mohd Zamin Jumaat, Salam M. A, Islam M. S, Hashim R Utilization of solid wastes in construction materials. International Journal of the Physical Sciences 5: (2010) 1952-1963.
[5] Vander sloot H. A, Comparison of the characteristic leaching behavior of cements using standard (EN 196-1) cement mortar and an assessment of their long-term environmental behavior in construction products during service life and recycling. Cem. Concr. Res. 30: (2000) 1079–1096.
[6] Guangren Q, Yali C, Pengcheong C, Joohwa T, Utilization of MSWI fly ash for stabilization/solidification of industrial waste sludge. Journal of Hazardous Materials B 129: (2006) 274–281.
[7] Ilangovana R, Mahendrana N, Nagamanib K Strength and Durability Properties of Concrete Containing Quarry Rock Dust as Fine Aggregate. ARPN J. Eng. Appl. Sci. 3: (2008) 20-26.
[8] Langan B. W, Weng K, Ward M. A, Effect of silica fume and fly ash on heat of hydration of Portland cement. Cement and Concrete Research 32: (2002) 1045–1051.
[9] Zhenhong L, Quanyuan C, Utilization of the sludge derived from dyestuff-making wastewater coagulation for unfired bricks. Construction and Building Materials 25: (2011) 1699–1706.
[10] Kornkanok B, Vanchai S, Kedsarin P, Prinya C, Improved geopolymerization of bottom ash by incorporating fly ash and using waste gypsum as additive. Cement and Concrete Composites 34: (2012) 819-824.
[11] Swarnalatha S, Srinivasulu T, Srimurali M, Sekaran G Safe disposal of toxic chrome buffing dust generated from leather industries. Journal of Hazardous Materials 150: (2008) 290–299.
[12] Sarkar A, Ruma R, Udaybhanu G, Basu A. K, A Comprehensive Characterization of Fly Ash from a Thermal Power Plant in Eastern India. Fuel Processing Technology 87: (2006) 259-277.
[13] Swarnalatha S, Ramani K, Geetha Karthi A, Sekaran G, Starved air combustion–solidification/stabilization of primary chemical sludge from a tannery. Journal of Hazardous Materials 137: (2006) 304-13.
[14] Nurdeen M. Altwair, Megat Azmi, Megat Johati, Syed Fuad Saiyid, Strength Activity Index and Micro Structural Characteristics of Treated Palm Oil Fuel Ash. International Journal of Civil & Environmental Engineering 11: (2011) 100-107.
[15] Zhenhong L, Quanyuan C, Utilization of the sludge derived from dyestuff-making wastewater coagulation for unfired bricks. Construction and Building Materials 25: (2011) 1699–1706.
[16] Tantawy M. A, Ei-Roudi, A. M, Elham M. Abdalla, Abdelzaher, M. A, Evaluation of the pozzolanic activity of sewage sludge ash. International scholarly research network. Article ID 487037: (2012) Doi:10.5402/2012/487037.
[17] Eisa E. Hekal, Wafaa S. Hegazi, Essam A. Kishar, Maha R. Mohamed Solidification/stabilization of Ni (II) by various cement pastes, Construction and Building Materials 25: (2001) 109–114.
[18] Aeslina Abdul Kadir, Abbas Mohajerani, Felicity Roddick, John Buckeridge, Density, Strength, Thermal Conductivity and Leachate Characteristics of Light-Weight Fired Clay Bricks Incorporating Cigarette Butts. International Journal of Civil and Environmental Engineering 2: (2010) 179-184
[19] Albinas gailius, Bozena vacenovska, Rostislav drochytka, Hazardous Wastes Recycling by Solidification/Stabilization Method. Materials science 16: (2010) 165-169.
[20] EPA. Records of decision analysis of superfund sites employing solidification / stabilization as component of the selected remedy. Washington, DC: USEPA, 1994.
[21] Minocha, A. K, Neeraj Jain, Verma, C. L, Effect of organic materials on the solidification of heavy metal sludge. Construction and Building materials 17: (2003) 1-5.
[22] American Concrete Institute (ACI) Committee 201, Guide to Durable Concrete. American Concrete Institute, Farmington Hills, Michigan, 1992, pp.1-41.
[23] Tabin Rushad, S, Abhishek Kumar, Duggal, S. K, Mehta, P. K, Experimental Studies on Lime-Soil-Fly Ash Bricks. International Journal of Civil and Structural Engineering 1: (2011) 994-1002.
[24] Alireza Naji Givi, Suraya Abdul Rashid, Farah Nora A. Aziz, Mohamad Amran Mohd Salleh, Contribution of Rice Husk Ash to the Properties of Mortar and Concrete: A Review. Journal of American Science 6: (2010) 157-165.
[25] Sha W, O Neill E. A, Guo Z, Differential scanning calorimetry study of ordinary Portland cement. Cement and Concrete Research 29, (1999) 1487–1489.
Author Information
  • Centre for Environment, Institute of Science and Technology, JNTUH, Hyderabad, India

  • Centre for Environment, Institute of Science and Technology, JNTUH, Hyderabad, India

  • Dept. of Civil Engg. Malla Reddy College of Engineering, Hyderabad, India

  • Centre for Environment, Institute of Science and Technology, JNTUH, Hyderabad, India

  • Dept. of Civil Engg. JNTUHCEH, Hyderabad, India

Cite This Article
  • APA Style

    Yamuna Rani M., Bhagawan D., Saritha P., V. Himabindu, V. Venkateswara Reddy. (2017). Treatment of Hazardous Solid Waste Using Solidification and Stabilization Technique. American Journal of Environmental Protection, 6(4), 94-100. https://doi.org/10.11648/j.ajep.20170604.13

    Copy | Download

    ACS Style

    Yamuna Rani M.; Bhagawan D.; Saritha P.; V. Himabindu; V. Venkateswara Reddy. Treatment of Hazardous Solid Waste Using Solidification and Stabilization Technique. Am. J. Environ. Prot. 2017, 6(4), 94-100. doi: 10.11648/j.ajep.20170604.13

    Copy | Download

    AMA Style

    Yamuna Rani M., Bhagawan D., Saritha P., V. Himabindu, V. Venkateswara Reddy. Treatment of Hazardous Solid Waste Using Solidification and Stabilization Technique. Am J Environ Prot. 2017;6(4):94-100. doi: 10.11648/j.ajep.20170604.13

    Copy | Download

  • @article{10.11648/j.ajep.20170604.13,
      author = {Yamuna Rani M. and Bhagawan D. and Saritha P. and V. Himabindu and V. Venkateswara Reddy},
      title = {Treatment of Hazardous Solid Waste Using Solidification and Stabilization Technique},
      journal = {American Journal of Environmental Protection},
      volume = {6},
      number = {4},
      pages = {94-100},
      doi = {10.11648/j.ajep.20170604.13},
      url = {https://doi.org/10.11648/j.ajep.20170604.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajep.20170604.13},
      abstract = {The immobilization of toxic metals present in the pharmaceutical effluent treatment plant (ETP) sludge is studied using the solidification/stabilization (S/S) technique. Different mixtures of cement, lime and bentonite as binders and additives (Pulverized fuel ash (PFA), silica fume and quarry dust) are used in order to reduce the mobility of the metal constituent of the pharma sludge as well as to strengthen brick. The interaction between the S/S matrix were studied using X-ray diffraction spectroscopy (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Thermo gravimetric-Differential Thermal Analysis (TG- DTA), Unconfined Compression Strength, Toxicity characteristics leaching procedure (TCLP) tests. The results showed that the optimized composition matrix have a strong fixing capacity for heavy metal includes Cu, Zn, Fe, Co, Pb, Ni and Cd. All the specimens have been observed to be sufficient in achieving the target compressive strength of 0.3 N/mm2 required for landfill disposal and mixed binders (Cement, Lime, and Bentonite) brick can be recommended for external use in construction i.e. for pave of pedestrian roads.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Treatment of Hazardous Solid Waste Using Solidification and Stabilization Technique
    AU  - Yamuna Rani M.
    AU  - Bhagawan D.
    AU  - Saritha P.
    AU  - V. Himabindu
    AU  - V. Venkateswara Reddy
    Y1  - 2017/07/31
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ajep.20170604.13
    DO  - 10.11648/j.ajep.20170604.13
    T2  - American Journal of Environmental Protection
    JF  - American Journal of Environmental Protection
    JO  - American Journal of Environmental Protection
    SP  - 94
    EP  - 100
    PB  - Science Publishing Group
    SN  - 2328-5699
    UR  - https://doi.org/10.11648/j.ajep.20170604.13
    AB  - The immobilization of toxic metals present in the pharmaceutical effluent treatment plant (ETP) sludge is studied using the solidification/stabilization (S/S) technique. Different mixtures of cement, lime and bentonite as binders and additives (Pulverized fuel ash (PFA), silica fume and quarry dust) are used in order to reduce the mobility of the metal constituent of the pharma sludge as well as to strengthen brick. The interaction between the S/S matrix were studied using X-ray diffraction spectroscopy (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Thermo gravimetric-Differential Thermal Analysis (TG- DTA), Unconfined Compression Strength, Toxicity characteristics leaching procedure (TCLP) tests. The results showed that the optimized composition matrix have a strong fixing capacity for heavy metal includes Cu, Zn, Fe, Co, Pb, Ni and Cd. All the specimens have been observed to be sufficient in achieving the target compressive strength of 0.3 N/mm2 required for landfill disposal and mixed binders (Cement, Lime, and Bentonite) brick can be recommended for external use in construction i.e. for pave of pedestrian roads.
    VL  - 6
    IS  - 4
    ER  - 

    Copy | Download

  • Sections